A1 / A2 Type Cable Glands

Size:- 20 Mm To 90 Mm | Standard:- EN 50262 : 1999 | Application:- Outdoor Or Indoor For Use With All Types Of Unarmoured Cable...

READ MORE

CW Type Cable Glands

Size:-20 Mm To 90 Mm S & L | Standard:- EN 50262 : 1999 | Application: For Indoor Or Outdoor Use With All Types Of SWA Cable Function.

READ MORE

BW Type Cable Glands

Size:- 20 Mm To 90 Mm | Standard:- BS 6121 | Application: Dry Indoor, For Use With All Types Of SWA Cable Function Provide Mechanical...

READ MORE

E1W Type Cable Glands

Size:- 20 Mm To 90 Mm S & L | Standard:- EN 50262 : 1999 | Application:- For Indoor Or Outdoor Use With All Types Of SWA Cable... V

READ MORE

E1FW Type Cable Glands

Suitable for indoor and outdoor use, appropriate for single wire armoured, plastic or rubber sheathed cable. Provides grip to the cable with outer and inner seals. Used popularly in most cliamatic con

READ MORE

IP 68 Cable Glands New Design

We Can Manufacture Up To M90 With Clamping Range From 60 To 75 Mm. Design And Other Specifications Can Be Changed As Per Requirements...

READ MORE

EMC Cable Gland

One of the important quality characteristics of electrical and electronic products is their electromagnetic compatibility (EMC).

READ MORE

PG Cable Glands IP-65 Protection

Size:- PG 7 To PG 48 | Standard:- EN 50262 : 1999 | Application:- Outdoor Or Indoor For Use With All Types Of Unarmoured Cable...

READ MORE

Brass Locknuts (PGm Metric & NPT )

Brass Locknuts re traditional components used in fastening glands to the gland plate & as they are identical material to the gland, corrosion effects are minimal.

READ MORE

Brass Earth Tags

Brass Earth Tags are Installed between the gland entry & equipment, provides an earth bond connection. It produces an earth bond connection for electrical continuity

READ MORE

Stopping Plug

Reducer allows a PG threaded gland to be terminated in enclosures with different entry thread form (ET NPT BSP BSPT)

READ MORE

PVC Shrouds

Push on shrouds which are used to minimize the risk of dirt or foreign substances gathering on the Cable Gland Body, and/or point of cable to a gland interface.

READ MORE

Star Washer

The serrated lock washer with external teeth for cable glands

READ MORE

Cable Glands Seals and “O” Rings

To maintain the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface.

READ MORE

Taper Pointed Air Rods

Important part of the air termination network for Lightning Protection System

READ MORE

Flat Air Rod Saddles

Used to support air rods on roof ridges

READ MORE

Air Rod Ridge Saddles

Used to support air rods on roof ridges

READ MORE

Light Duty Air Rod Saddles

Used to support air rods on flat roof surfaces

READ MORE

Side Mounting Air Rod Brackets

Used where it is not possible to fit a saddle onto the building roof

READ MORE

Rod to Tape Couplings

Used to connect flat tape to air rod

READ MORE

Metallic DC Clips

Secure flat tape conductor to building surface

READ MORE

Tape Clips

Holds flat tape conductor to the building surface

READ MORE

Glazing Bar Holdfasts

Originally designed to be used on glazing units

READ MORE

Black Plate Holdfasts

Designed to be used where necessary to hold conductor away from the building surface

READ MORE

Square Tape Clamps

Four-way connectors, suitable for making cross, straight through or tee joints in flat tape

READ MORE

Oblong Junction Clamps

Designed to join a range of tape sizes in a straight through position

READ MORE

Plate Type Test Clamps

Used to form a disconnecting joint between the down conductor and earthing system

READ MORE

Screw Down Test Clamps

Allows easy access to copper conductors where frequent inspection and testing may be necessary

READ MORE

Bimetallic Connectors

Made by friction welding process

READ MORE

B Bonds

Used for bonding aluminium and copper tapes to flat metal surfaces

READ MORE

Watermain Pipe Bond

Designed to bond large diameter metallic pipes into earthing and lightning protection systems

READ MORE

Rainwater Pipe Bond

can be used on any application where tape needs to be wrapped around circular objects such as pipes or rails

READ MORE

Air Rods

Manufactured from 10mm and 12mm diameter rods

READ MORE

One hole Conductor Clips

Provide easy method of fixing copper and aluminium conductors to surfaces

READ MORE

Metallic Conductor Clips

Secure solid circular conductor to the building surfaces

READ MORE

T Connector Clamps

Designed for connecting roof network to down conductors of 8mm solid circular Lightning Protection Systems

READ MORE

Interface Test Clamps

Used for connecting flat tape to solid circular conductor, where Lightning Protection System is designed in 8mm Copper Conductor but connection to earth rod is made using 25mm x 3mm flat copper tape

READ MORE

Square Tape to Circular Conductor Connectors

Four-way connector clamps, suitable for crossing over flat tape and solid circular conductors

READ MORE

Bimetallic Connectors

Used to join 8mm aluminium and copper solid circular conductors together

READ MORE

Tower Earth Clamps

Used for bonding copper and aluminium conductors on to steel surfaces

READ MORE

Brass Electrical / Conduit Fittings

We manufacture a wide spectrum of Products & Fittings for the Electrical Applications and for the Electrical Apparatus. We make the customized products as per the specifications and needs of our cust

READ MORE

Copper Bonded Earth Rods

Features : Produced by electrolytically bonding steel-core with 99.95 % pure copper.

READ MORE

Threaded Couplings

Features : High-strength couplings, used for joining copperbond threaded earthrods together

READ MORE

Threaded Driving Heads

Features : Screw into threaded couplings to allow deep driving of the earth rods

READ MORE

Solid Copper Earth Rods

Features : Produced from Electrolytic Grade Copper

READ MORE

Driving Heads

Features : Protects internal thread

READ MORE

Driving Spikes

Features : Enable the rods to be driven easily into the ground

READ MORE

Coupling Dowels Stainless Steel

Features : Stainless steel coupling dowels are used to join stainless steel earth rods together

READ MORE

Stainless Steel Earth Rods

Features : Produced from stainless steel

READ MORE

Coupling Dowels Solid Copper

Features : Coupling dowels are used to join solid copper earth rods together

READ MORE

Galvanised Steel Earth Rod

Features : Produced by hot-dip galvanising machined steel rod with a coating of zinc not less than 90 microns

READ MORE

Earth Rod to Tape A Clamps

Features : Aluminium Bronze with M10 x 25mm Phosphor Bronze Set Screw

READ MORE

Earth Rod to Cable G Clamps

Features : Used for joining earth rods to different sizes of stranded copper conductor

READ MORE

U Bolt Clamps

Features : Versatile range of 'U' bolt clamps

READ MORE

Single Plate Type for Horizontal Flat Tapes

Used to connect flat tapes in a horizontal position on the rod

READ MORE

Double Plate Type for Vertical Flat Tapes

Used to connect flat tapes in a horizontal position on the rod

READ MORE

Double Plate Type for Vertical Stranded Cables

Used to connect flat tapes in a horizontal position on the rod

READ MORE

Re-bar Clamps

Features : Require bonding to concrete encased electrodes (Re-bar) in grounding systems

READ MORE

Split Connector Clamps

Features : Used to connect cable lugs onto earth rods

READ MORE

Copper Bonded Earth Plates

Copper Bonded Earth Plates provides a long lasting earthing solution in places where driving earth rods might be impractical.

READ MORE

Solid Copper Lattice Mats

More economical option to installing solid copper plates

READ MORE

Inspection Housing Earth Bars For Heavy Duty Earth Pits

Fit into slots provided in heavy duty earth inspection housings

READ MORE

Inspection Housing Earth Bars For Light Duty Earth Pits

Features : Fit into slots provided in light duty earth inspection housings

READ MORE

For Concrete Earth Pits

These earth bars fit into the slots provided in the concrete inspection housings and are used when multiple connections to the earth rod are required.

READ MORE

Concrete Earth Pits

These pits provide access to earth rods and the corresponding connections to earthing grids.

READ MORE

Earth Bonding Points

Connect the re-bar to the earthing or lightning protection system

READ MORE

Earth Bars

Available in a variety of sizes and specifications (Standard earth bars are shown in the tables below)

READ MORE

Disconnectiong Link

Used for joining earth rods to different sizes of stranded copper conductor.

READ MORE

Insulators

Supplied with or without studs and locking nuts

READ MORE

Earth Blocks/ Neutra Link

Allow earth conductor termination or live conductor termination with a suitable, fully insulated housing.

READ MORE

Earth Boss

Welded onto steel vessels, tanks and other structures.

READ MORE

Tower Earth Clamps

Used for bonding copper conductors onto steel surfaces

READ MORE

Parallel Groove Clamps

Manufactured from high-strength, corrosion-resistant copper alloy

READ MORE

Split Bolt Connectors

High strength split bolt connectors accept a wide range of stranded copper conductors.

READ MORE

Flexible Copper Braid Bonds

Used for bonding metal gates, doors, fences, etc.

READ MORE

Earth Rod Copper Plated

6ft height and 13.5 mm diameter

READ MORE

Hard Drawn Bare Wire

Size Assorted From SWG 1 to SWG 10

READ MORE

Static Earth Receptacle

Used in open areas where a temporary earthing point may be required, such as airfields or petrol stations.

READ MORE

Eyebolts

Provides static earth point when attached to the top of a threaded copperbond earth rod

READ MORE

Taper Pointed Air Rods

Important part of air termination network of Lightning Protection System

READ MORE

Multi Point

Used in conjunction with taper pointed copper air rods.

READ MORE

Side Mounting Air Rod Brackets

Used where it is not possible to fit saddle onto the building roof

READ MORE

Rod to Cable Couplings

enables the stranded cable to be connected to the air rod. Used in conjuction with the side mounting air rod brackets

READ MORE

One hole Cable Clips

Offer ease in fixing stranded copper conductors to surfaces.

READ MORE

Metallic Cable Clip

Used to secure circular down conductors to building surfaces

READ MORE

Square Cable Clamps

Four way connectors, suitable for making cross, straight tee or through joints in stranded copper conductor.

READ MORE

Tower Earth Clamps

Double plate ensures proper bonding of stranded copper conductors onto steel surface.

READ MORE

Air Rod Cable Saddles

Used to support copper taper pointed air rods on flat roof surfaces.

READ MORE

Cable to Tape Connectors

Four way connector clamps, suitable for crossing over flat tape and solid circular conductor.

READ MORE